Undercover

I recently bought a 235" Undercover 4 link car. Now I'm just trying to get Ford motor plates from Undercover, and see if i can get the Chevy stink off of the car

Cool deal! They aren't hard to make if you already have the Chevy plate.

nice car for sure..

Ace

that look like a pic from Atco ! I have plates that you could copy if you have any time problems . Im in NJ.
Tha e plates are for a 2000 <21 inch wide car.

thanks for the offer. My plates actually came in UPS about 10 minutes after i posted. That Probably was Atco. The guy i bought the car from was a fellow racing her at New England Dragway, and he did hit the money races

cool glad it worked out ,good luck with the new car !

What engine combination are you going to run?

Sorry FC, i didnt notice your question. I just finished up a 525 cube with A460 heads

That's what i got in my Dragster. 525ci A headed motor.

i put my engine specs in the "proven build" but quickly, its a
4.125 stroke
4.500 bore
13.5-1 comp
stock 340cc A heads.
TFS intake
star vac pump
A460 block
1050 stinnent Dominator
Ultradyne cam
best run so far 7.72@175 no tuning yet. its very "fat n happy"

That thing is running good. How much does your car weight with you in it? Mine is 4.29 stroke and 4.42 bore. I have the old A460 Motorsports heads. I run a stock block. Mine weights 1944lbs and been 4.94@138 and 7.80@170.

those are respectable times. I have my cam 2 degrees back (on ultradyne's recommendation) so my 60' is alittle soft (1.155) but it runs good at the 1/8 4.80@140, and i also attribute that to my higher 1/4 MPH
i put my tight ATI 8" converter in it from my door car. It is only slipping 4% at the stripe. so its a pretty efficient set up

i was so busy getting it all together that i didnt get a chance to put it across the track scale yet. i will do that this weekend, and let you know

Yea my cam is retarded 2* also but that was to get the intake valve to clear the piston. My best 60ft has been 1.13 but consistently at 1.15.